[GW INSTEK AFG-2100 Series] 임의파형 발생/주파수카운터
GW INSTEK AFG-2100 Series Waveform Function Generator
주요특징 (Features)
• 주파수 범위 : 25MHz/12MHz/5MHz
• 채널수 : 1
• 샘플링 레이트 : 20MSa/s
• 메모리 길이 : 4k
• 주파수 분해능 : 0.1Hz
• 주파수 안정도 : ± 20ppm
• 수직 분해능 : 10비트
• 디스플레이 : 3.5인치 LCD
• 기본 파형 : 정현파, 구형파, 삼각파, 램프, 노이즈, 임의파형
• 변조 파형 : AM, FM, FSK (AFG-2100 시리즈)
• 기본 기능 : TTL 출력, DC 오프셋
• 기본 기능 : 주파수 스윕, 주파수 카운터 지원 (AFG-2000 시리즈)
• PC 소프트웨어 제공 : 임의파형 편집
• 인터페이스 : USB(디바이스)
상세설명 (Description)
The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.
The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.
The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.
Adjustable Duty Cycle
The adjustable duty cycle of square waveform is a commonly used feature of a Function Generator. For a conventional Function Generator, however, the adjustable duty cycle mostly falls in a limited 20% ~ 80% range, which may not fit the demands of specific applications. The AFG-2100/2000 Series is able to provide a 1% ~ 99% variable duty cycle for its square waveform output. This feature allows the AFG-2100/2000 Series to be used as a Pulse Generator to create pulse waveform simulating a spike signal or a transient signal in most of the generic applications.
Adjustable Duty Cycle
The adjustable duty cycle of square waveform is a commonly used feature of a Function Generator. For a conventional Function Generator, however, the adjustable duty cycle mostly falls in a limited 20% ~ 80% range, which may not fit the demands of specific applications. The AFG-2100/2000 Series is able to provide a 1% ~ 99% variable duty cycle for its square waveform output. This feature allows the AFG-2100/2000 Series to be used as a Pulse Generator to create pulse waveform simulating a spike signal or a transient signal in most of the generic applications.
Parameter Setting
The keypad entry and/or knob selection for waveform parameter setting is a unique feature of the AFG-2100/2000 Series. The conventional analog knob, which is commonly adopted in the AFG design, is not accurate enough for precision setting of waveform parameters, and may generate noise to interfere the system operation. The keypad entry design of AFG-2100/2000 Series improves the setting uncertainty of conventional Function Generator and therefore significantly increases the accuracy of its waveform output. Besides keypad entry, the AFG-2100/2000 Series also offers the knob selection convenience with a digital knob design, which allows user to see the parameter value change in detail on the 3.5” LCD screen when the adjustment is in progress.
Waveform Amplitude & DC Offset
Besides output waveform frequency, the AFG-2100/2000 Series is able to show output waveform amplitude, DC offset and other key setting information on the LCD screen simultaneously. This provides the convenience for user to know what signal is being sent out at the output terminal without the need to check the waveform through an oscilloscope. Further more, the waveform amplitude value can be shown in one of the three units, including Vpp, Vrms and dBm, depending on user’s selection. This saves time for tedious math conversion among various units of waveform amplitude.
AM/FM/FSK Modulation, Sweep & Frequency Counter
All AFG-2100 models are equipped with additional AM/FM/FSK Modulation, Sweep & Frequency Counter functions. The AM/FM modulated signal provides a means for basic modulation circuit tests and experiments. Whereas, the FSK modulated signal is offered as a convenient source for the performance evaluation of digital modulation circuits. The Sweep function, with accurate frequency sweep range & sweep time, adequately fits a lot of basic applications in the market, such as sweep-tone test of the speaker in a 20Hz ~ 20kHz sweep range. The built-in frequency counter of AFG-2100 is able to measure the frequency of an external signal up to 150MHz. This add-on value saves for user an additional cost of purchasing a standalone frequency counter.
USB Interface
The AFG-2100/2000 Series provides a USB Device Interface, which allows the programming of remote control or ATE of the product. An arbitrary waveform editing software is available to facilitate the waveform creation task. After the waveform editing is completed on the PC, the waveform data can be downloaded through USB Interface to the AFG-2100/200 for arbitrary waveform output.
Arbitrary Waveform Editing PC Software
The arbitrary waveform editing software contains not only waveform drawing tools but also a wide variety of waveform editing functions. The most commonly used waveforms, including Rayleigh, Gaussian, Normal Noise, Pseudo Ternary, Bipolar AMI, Manchester, Differential Manchester, RS-232, and NRZ etc., are available in the library for user to tailor specific waveforms as needed. Besides, this software can import CSV format file as waveform data which is created by the other tools. The editing software will stretch AFG-2100/2000 to more applications.
Technical specifications
VOLTAGE | AFG-2000 series | AFG-2100 Series | |||||
---|---|---|---|---|---|---|---|
AFG-2005 | AFG-2012 | AFG-2025 | AFG-2105 | AFG-2112 | AFG-2125 | ||
Waveforms | |||||||
Sine, Square, Ramp, Noise, Arbitrary Waveform | |||||||
Arbitrary Waveform | |||||||
Sample Rate | 20 MSa/s | ||||||
Repetition Rate | 10MHz | ||||||
Waveform Length | 4k points | ||||||
Amplitude Resolution | 10 bit | ||||||
Non-Volatile Memory | 4k points | ||||||
Frequency Characteristics | |||||||
Range | Sine, Square | 0.1Hz~5MHz | 0.1Hz~12MHz | 0.1Hz~25MHz | 0.1Hz~5MHz | 0.1Hz~12MHz | 0.1Hz~25MHz |
Ramp | 0.1Hz~1MHz | ||||||
Resolution | Sine, Square, Ramp | 0.1Hz | |||||
Accuracy | Stability | ±20 ppm | |||||
Aging | ±1 ppm, per 1 year | ||||||
Tolerance | ≦ 1 mHz | ||||||
Output Characteristics | |||||||
Amplitude | Range | 1 mVpp to 10 Vpp(into 50Ω), 0.1Hz~20MHz 2 mVpp to 20 Vpp(open-circuit) , 0.1Hz~20MHz 1 mVpp to 5 Vpp(into 50Ω), 20MHz~25MHz 2 mVpp to 10 Vpp(open-circuit), 20MHz~25MHz |
|||||
Accuracy | ± 2% of setting ±1 mVpp (at 1 kHz,>10 mVpp) | ||||||
Resolution | 1 mV or 3 digits | ||||||
Flatness | ± 1% (0.1dB) ≦100kHz ± 3% (0.3 dB) ≦5MHz ± 4% (0.4 dB) ≦12MHz ± 20% (2 dB) ≦20MHz ± 5% (0.4 dB) ≦25MHz (sine wave relative to 1 kHz) |
||||||
Units | Vpp, Vrms, dBm | ||||||
Offset | Range | ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) ±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz ±5Vpk ac +dc (Open circuit) for 20MHz-25MHz |
|||||
Accuracy | 2% of setting + 5 mV+ 0.5% of amplitude | ||||||
Output | Impedance | 50Ω typical (fixed) > 300kΩ (output disabled) | |||||
Protection (main output) | Short-circuit protected by overload relay automatically disables output | ||||||
SYNC Output | Level | TTL-compatible into>1kΩ | |||||
Impedance | 50Ω nominal | ||||||
Rise or Fall Time | ≦25ns | ||||||
Sine wave Characteristics | Harmonic Distortion | –55 dBc DC ~ 200kHz, Ampl > 0.1Vpp –50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp –35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp –30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp |
|||||
Square wave Characteristics |
Rise/Fall Time | ≦25ns at maximum output (into 50Ωload) | |||||
Overshoot | < 5% | ||||||
Asymmetry | 1% of period+1 ns | ||||||
Variable Duty Cycle | 1.0% to 99.0% ≦ 100kHz 20.0% to 80.0% ≦ 5 MHz 40.0% to 60.0% ≦10MHz 50% ≦ 25MHz |
||||||
Ramp Characteristics | Linearity | < 0.1% of peak output | |||||
Variable Symmetry | 0% to 100%(0.1% Resolution) | ||||||
AM Modulation | |||||||
Carrier Waveforms | - | Sine, Square, Triangle | |||||
Modulating Waveforms | - | Sine, Square, Triangle | |||||
Modulating Frequency | - | 2 mHz to 20 kHz (Int), DC to 20KHz (Ext) | |||||
Depth | - | 0% to 120.0% | |||||
Source | - | Internal / External | |||||
FM Modulation | |||||||
Carrier Waveforms | - | Sine, Square, Triangle | |||||
Modulating Waveforms | - | Sine, Square, Triangle | |||||
Modulating Frequency | - | 2 mHz to 20 kHz (Int), DC to 20KHz (Ext) | |||||
Deviation | - | DC to Max Frequency | |||||
Source | - | Internal / External | |||||
SWEEP | |||||||
Waveforms | - | Sine, Square, Triangle | |||||
Type | - | Linear or Logarithmic | |||||
Start F / Stop F | - | 0.1Hz to Max Frequency | |||||
Sweep Time | - | 1 ms to 500 s | |||||
Source | - | Internal / External | |||||
FSK | |||||||
Carrier Waveforms | - | Sine, Square, Triangle | |||||
Modulating Waveforms | - | 50% duty cycle square | |||||
Modulation Rate | - | 2mHz to 100kHz(INT), DC to 100kHz(Ext) | |||||
Frequency Range | - | 0.1Hz to Max Frequency | |||||
Source | - | Internal / External | |||||
Frequency Counter | |||||||
Range | - | 5Hz to 150MHz | |||||
Accuracy | - | Time Base accuracy±1count | |||||
Time base | - | ±20ppm (23℃ ± 5℃) after 30 minutes warm up | |||||
Resolution | - | 100nHz for 1Hz, 0.1Hz for 100MHz | |||||
Input Impedance | - | 1kΩ/1pf | |||||
Sensitivity | - | 35mVrms ~ 30Vms (5Hz to 150MHz) | |||||
System Characteristics | |||||||
Store/Recall | 10 Groups of Setting Memories | ||||||
Interface | USB(Device) | ||||||
Display | LCD | ||||||
General Specifications | |||||||
Power Source | AC100~240V , 50~60Hz | ||||||
Power Consumption | 25 VA | ||||||
Operating Environment | Temperature to satisfy the specification : 18 ~ 28°C Operating temperature : 0 ~ 40°C Relative Humidity: ≤ 80%, 0 ~ 40°C, ≤ 70%, 35 ~ 40°C Installation category: CAT Ⅱ |
||||||
Operating Altitude | 2000 meters | ||||||
Storage Temperature | -10 ~ 70°C, Humidity: ≤70% | ||||||
Dimensions, Weight | 266(W)×107(H)×293(D) mm, Approx. 2.5 kg |
Accessary
기본 악세사리 |
---|
• CD (사용 설명서+소프트웨어) x1 |
옵션 악세사리 |
• GTL-246 ; USB 케이블 |
- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
- 저희 텍캄몰에서 구매하신 제품과 상품은 정품으로 본사 및 전문점에서 A/S를 받을 수 있습니다.
- 무상 A/S기간에 상관없이 밴드교체 및 유리교체 등 소모품성 및 고객님의 부주의로 인한 파손은 유상 A/S(비용청구)로 처리됩니다.
- A/S 처리방법은 매장으로 방문하시거나 전화해 주시고, 우편이나 택배이용시 배송료는 본인 부담입니다.
- A/S 처리기간은 고장상태와 부품조달 관계로 1주일에서 최장 3개월까지 걸릴 수 있습니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?