[DEVISER E7042B] 시그널 프로파일러 / Signal PROFILER
DEVISER E7042B Signal PROFILER
▣ Key Benefits
• RF, fiber and wireless signal quality testing – in a single instrument
• Perform traditional RF feedline tests, inspect fiber connectors with auto pass/fall results and measure RF/Optical power
• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment
• Test MIMO 4x4 antenna performance
• Detect signal degradation and system performance over time with trace overlay
• Handheld, lightweight, field-proven design withstands harsh environments and lighting conditions
▣ Product Overview
The SignalPROFILER combines the power and functionality of cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.
As a multi-functional instrument, the SignalPROFILER can be configured to meet your specific test needs at the time of purchase or at a later date as your test needs evolve. Additional measurement capability can be added on the fly in the field in a matter of seconds.
Designed specifically for wireless communication field engineers and technicians who install, maintain and troubleshoot wireless communication sites, the SignalPROFILER was developed to get the job done right – the first time – with multiple cutting edge features that deliver accurate results, improve productivity and reduce OPEX and CAPEX.
▣ Standard Measurements & Applications (Cable & Antenna Analysis)
• Reflection – Return Loss or VSWR
• Fault Location – DFT/RL or DTF/VSWR
• Cable Loss
• 1-Port Phase
• Smith Chart
• FiberScope Fiber Connector Inspection (DML-OPI)
• Optical Power Meter (DML-OPM)
• Visual Fault Location (DML-VFL)
▣ Standard Measurements & Applications (Spectrum Analysis)
• Spectrum Analysis
• Channel Power
• Occupied Bandwidth (OBW)
• Adjacent Channel Leakage Ratio (ACLR)
• Field Strength
• AM/FM
▣ Optional Measurement Modes
• High Precision Power Meter (DML-015)
• Interference Analysis (DML-110)
• Coverage Mapping (DML-120)
• Transmission Measurement (DML-025)
• GPS Receiver (DML-999)
Technical specifications (Cable Analyzer)
Frequency | |
Frequency Range | 2 MHz – 4GHz |
---|---|
Resolution | 1 kHz |
Measurement Speed | |
Reflection | < 0.8 mS/point |
DTF | < 1 mS/point |
Data Points | 130, 259, 517, 1033, 2065 |
Measurement Accuracy | |
Corrected Directivity | 42 dB (typical, after standard OSL calibration) 38 dB (typical, after eCAL calibration) |
Output Power | |
O dBm (Nominal) | |
Interference Immunity | |
On-channe | +20 dBm @ >1 MHz of carrier frequency |
Off-channel | +10 dBm within ± 10 kHz of carrier frequency |
Measurements | |
Return Loss | 0 to 60dB (resolution 0.01 dB) |
VSWR | 1:1 to 65:1 (resolution 0.01) |
Cable Loss | 0 to 30dB (resolution: 0.01 dB) |
DTF Range (Distance) | 1500 meters (4921 feet) |
Connectors (Reflection/RF Out) | |
RF Out | Type N, female, 50Ω |
RF Out Damage Level | 25 dBm, ± 50 VDC peak |
Impedance | 50Ω |
Technical specifications (Optical Measurements)
Optical Microscope | |
Field of view | 680 mm x 510 mm |
---|---|
Resolution | 0.5 mm |
Light source | Blue LED |
Focus control | Adjustable |
Dimensions | 175 mm x 435 mm |
Weight | 200 g |
Optical Power Meter | |
Accuracy | ±0.25dB |
Probe Type | InGaAs Ф300μm |
Dynamic Range | -50dBm ~ +27dBm |
Resolution | 0.01 dBm, mW, uW, nW |
Wave Length | 850 nm, 980 nm, 1300 nm, 1310nm, 1490nm, 1550nm, 1610 nm |
Adapter | FC/SC/ST |
VFL | |
Output Power | 10mW |
Adapter | FC/PC |
Technical specifications (Spectrum Analyzer)
Frequency | |
Frequency Range | 9 kHz – 4 GHz |
---|---|
Tuning Resolution | 1 Hz |
Aging | <± 1.0ppm/yr |
Frequency Span | 1 kHz to 4 GHz in 1-2-5 sequence (automode), and 0 Hz (zero span) |
Bandwidth | |
Resolution Bandwidth (RBW) | 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) |
Video Bandwidth (VBW) | 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) |
Spectral Purity (Phase Noise) | |
@ 1 kHz Offset from carrier | -90 dBc/Hz |
@ 10 kHz Offset from carrier | -100 dBc/Hz |
@ 100 kHz Offset from carrier | -105 dBc/Hz |
Amplitude | |
Dynamic Range | > 100 dB |
Measurement Range | DANL to maximum safe input level |
Maximum Safe Input | +30dBm (peak power, input attenuation > 15dB), 50VDC |
Amplitude Accuracy | ≤ ± 1.0 dB |
Attenuator Range | 0 dB to 55 dB in 5 dB steps |
Displayed Average Noise Level (DANL) | |
(Input terminated, RBW = 1 Hz, Attn = 0 dBm, Avg Detector) | |
Preamp Off | ≤ -144 dBm, typical (1MHz – 1GHz) ≤ -138 dBm, typical (1GHz – 4GHz) |
Preamp On | ≤ -158 dBm, typical (1MHz – 1GHz) ≤ -154 dBm, typical (1GHz – 4GHz) |
Technical specifications (RF Power Meter)
USB Smart RF Power Sensor | |
Frequency Range | 1 kHz – 6 GHz |
---|---|
Measurement Range | 1μW~100mW(-30~+20dBm) |
VSWR | 1.1 |
Resolution | 1dB, 0.1dB, 0.01dB, 0.001dB |
Dimension | 124 x 44 x 24 |
Weight | 250g |
Accuracy | Typ.: ±0.2dB |
Inline RF Power Meter | |
Frequency range | 300MHz to 4000MHz |
Measurement Range | 0.15W to 150W |
Insert Loss | 0.1dB |
VSWR | 1.1 |
Directivity | 30dB |
Accuracy | ±4%±0.05W(+15~+35°C) ±7%±0.05W(-10~+50°C) |
Connector | Type N(f), 50 Ω |
Technical specifications (General)
Connectors | |
RF In | Type N, female, 50Ω |
---|---|
RF In Damage | +30 dBm, +50 VDC |
Connectivity | |
USB host | Type A, 1-Port (connect flash drive for data transfer) |
USB client | 5-pin mini-B (connect to PC for data transfer) |
LAN | 10M/100M LAN Port |
Display | |
Type / Size | TFT LCD / 8.4” (800 x 600) |
Data Storage | |
Internal | 1 GB, > 2000 saved measurement files |
External | Limited by size of USB flash drive |
Battery | |
Type | Li-Ion, 11.1V, 5.2AH |
Operation | > 6.0 hours, continuous; 8.0 hrs, idle (CA mode) > 4.0 hours, continuous; 8.0 hrs, idle (SA mode) |
Environmental | |
Operating Temperature | -10°C to + 55 °C |
Storage Temperature | -40 °C to + 75 °C |
Shock | Mil-PRF-28800F Class 2 |
EMC | |
European EMC | IEC/EN 61326-1:2006 |
AC Power | |
AC Adapter Output | 15-19 VDC |
AC Adapter Input | 100 – 240 VAC, 50-60 Hz |
Size & Weight | |
Size | 258 mm x 173 mm x 74 mm (10.2 in x 6.8 in x 2.9 in) |
Weight | 3 kg (6.6 lbs) |
- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
- 저희 텍캄몰에서 구매하신 제품과 상품은 정품으로 본사 및 전문점에서 A/S를 받을 수 있습니다.
- 무상 A/S기간에 상관없이 밴드교체 및 유리교체 등 소모품성 및 고객님의 부주의로 인한 파손은 유상 A/S(비용청구)로 처리됩니다.
- A/S 처리방법은 매장으로 방문하시거나 전화해 주시고, 우편이나 택배이용시 배송료는 본인 부담입니다.
- A/S 처리기간은 고장상태와 부품조달 관계로 1주일에서 최장 3개월까지 걸릴 수 있습니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?