[EXFO NetBlazer V2 Series / FTB-870V2, FTB-870Q] 통합분석기 / High-Speed Portable Field Testers
EXFO NetBlazer V2 Series / FTB-870V2, FTB-870Q High-Speed Portable Field Testers
주요특징 (Features)
플랫폼: FTB-1
• DSn/PDH, ISDN, SONET/SDH, OTN, Ethernet 통합 테스트 (10 Gbit/s)
• 1x, 2x, 4x, 8x, 10x 인터페이스를 통한 최상의 광 네트워크 검사
• Layer-2 CPRI 프로토콜을 통한 FTTA RRH 검증
• 1.2~9.8 Gbit/s의 인터페이스 속도
• DS1, E1 PRI 테스트와 문제해결에 적합한 ISDN 솔루션
• 합격/불합격 BER(Bit-Error-Rate) 테스트
• Y.1731, G.8113.1(MPLS-TP), MEF 및 802.1ag 표준을 커버하는 Ethernet OAM 테스트
▣ 모델별 사양
NetBlazer V2 10G | NetBlazer V2 100G | |||||
---|---|---|---|---|---|---|
NETBLAZER V2 MODULES | FTB-870V2 | FTB-880V2 | FTB-870Q | FTB-880Q | FTB-890 | FTB-890NGE |
DSn/PDH (DS1/E1, ISDN PRI) | • | • | • | • | - | • |
DSn/PDH (DS1/DS3, E1, E3, E4) | - | • | - | • | - | • |
OTN | • | • | • | • | • | • |
SONET/SDH (up to 10G) | • | • | • | • | • | • |
SONET/SDH (electrical) | - | • | - | • | - | • |
Fibre Channel (1x, 2x, 4x, 8x,10x) | • | • | • | • | • | • |
Fibre Channel (16x) | - | - | - | - | • | • |
1588 PTP/SyncE | • | • | • | • | • | • |
Carrier Ethernet OAM | • | • | • | • | • | • |
RFC 6349 (up to 100G TCP) | • | • | • | • | • | • |
ExacTCP (up to 1G TCP) | • | • | • | • | • | • |
CPRI (1.2G up to 9.8G) | • | • | • | • | • | • |
RF spectrum analysis over CPRI links | • | • | • | • | - | • |
Dual-Port Testing | • | • | • | • | - | • |
Quad-Port Testing | - | - | • | • | - | - |
Simultaneous Transport/Datacom Testing | - | - | • | • | - | - |
상세설명 (Description)
The Ultra-Portable Choice for Multiservice Testing of Speeds Up to 100G
The ongoing transition toward a converged network infrastructure for legacy DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel, requires a test tool that can cover a wide range of interfaces and rates, without sacrificing portability, speed or cost. Leveraging the powerful, intelligent FTB-1 Pro handheld platform, the NetBlazer V2 Series streamlines processes and empowers field technicians to test and validate DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel, common public radio interface (CPRI) and packet-based high-speed Ethernet services efficiently.
iSAM: Ultra-Simple Ethernet Service Activation Test Methodology—Put Time Back on Your Side
iSAM, EXFO’s intelligent Ethernet service activation methodology brings simplicity to field testing. Based on the ITU-T Y.1564 and RFC 6349 standards, iSAM streamlines Ethernet testing with a one-page test configuration.
Speed Up Ethernet Testing
With iSAM, the focus is on performing Ethernet testing faster and simpler, making the Y.1564 and RFC 6349 standards as easy as possible for technicians at any skill level to use. A key component lending to iSAM’s simplicity is the reduced number of steps it actually takes to setup, run and receive a valid test result, thus delivering first-time-right results–every time.
In addition to the simplicity it brings to the world of Ethernet testing, iSAM also includes the latest cutting-edge Metro Ethernet Forum (MEF) profiles. Using predefined performance metric profiles from MEF 23.1, field technicians can quickly select the MEF service type they need to test, and validate Ethernet services in a consistent and repeatable manner.
Accelerate Time to Revenue
iSAM was designed to help service providers and their technicians seamlessly transition from legacy testing methodologies to a simpler and more powerful Ethernet test methodology. By combining iSAM’s easy and cutting-edge capabilities with EXFO’s flexible licensing options, service providers now have access to an Ethernet testing solution that will maximize testing efficiencies and greatly improve time to revenue.
Key Features
• Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel (1x-16x), CPRI and Ethernet interfaces up to 100 Gbit/s
• iSAMintelligent service activation methodology, based on the ITU-T Y.1564 and RFC 6349 standards, simplifies and speeds up • Ethernet service activation
• RFC-6349 testing: 10M-100G multisession TCP testing with bidirectional results
• Pluggable CFP4 and QSFP28 optics to facilitate the testing of next-generation networks, and QSFP+ interface for 40GigE
• Dual-port or Quad-port testing up to 10G WAN and LAN, allows technicians to run up to four simultaneous tests
• FTTA/C-RAN validation from 1.2 Gbit/s to 9.8 Gbit/s via layer-2 CPRI protocol and unframed BER testing
• Real-time, high-resolution radio frequency (RF) spectrum analysis using digitized RF data (IQ data) in the CPRI link
• Carrier Ethernet OAM testing covering the Y.1731, G.8113.1 (MPLS-TP), MEF and 802.1ag and IEEE 802.3ah Link OAM standards
• Ethernet service activation with EtherSAM (ITU-T Y.1564) service configuration and performance tests, complemented by Remote • Discovery, Smart Loopback and Dual Test Set capabilities
• Ultra-powerful processing backed by quad-core FTB platform with Windows 8.1 Professional operating system, providing access to many third-party apps and the ability to connect to a wide range of devices
Technical specifications a
Module Versions | FTB-880V2 | FTB-870V2 | FTB-880Q | FTB-870Q |
---|---|---|---|---|
Size (H x W x D) | 210mm X 254mm X 55mm | 210mm X 254mm X 76mm | ||
Weight | 0.91kg | 0.85kg | 2.1kg | 1.84kg |
Opreating temperature | 0℃ to 50℃(32℉ to 122℉) up to 2000m(6564ft) | |||
Relative humidity | 0% to 95% non-condensing | |||
Battery duration | Over two hour | Over one hour | ||
Battery charging time | Two hours | |||
Languages | English, Chinese, Japanese and Korean |
Module Versions | FTB-880V2 | FTB-870V2 |
---|---|---|
Size (H x W x D) | 210mm X 254mm X 76mm | |
Weight | 1.85kg | 2.2kg |
Opreating temperature | 0℃ to 40℃(32℉ to 104℉) up to 2000m(6564ft) | |
Relative humidity | 0% to 95% non-condensing | |
Battery duration | Over and hour | |
Battery charging time | Two hours | |
Languages | English, Chinese, Japanese and Korean |
- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
- 저희 텍캄몰에서 구매하신 제품과 상품은 정품으로 본사 및 전문점에서 A/S를 받을 수 있습니다.
- 무상 A/S기간에 상관없이 밴드교체 및 유리교체 등 소모품성 및 고객님의 부주의로 인한 파손은 유상 A/S(비용청구)로 처리됩니다.
- A/S 처리방법은 매장으로 방문하시거나 전화해 주시고, 우편이나 택배이용시 배송료는 본인 부담입니다.
- A/S 처리기간은 고장상태와 부품조달 관계로 1주일에서 최장 3개월까지 걸릴 수 있습니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?