[DEVISER TC602RE] 핸드타입 Gbit 이더넷 & E1 측정기 / Ethernet Backhaul Service Tester
DEVISER TC602RE Ethernet Backhaul Service Tester

 

---

 

Key Benefits

• Complete solution for activating, verifying & fault-diagnosing Ethernet service from 10Mbit/s to 1Gbit/s quickly and easily
• Convenient and intuitive user interface
• Integrates multiple software tools for field measurement, ensuring high cost-performance
• Professional PDF and CSV data report generation
• Rechargeable lithium battery powers continuous use for over 3.5 hours (4 hours idle)

 

 

Key Features

Ethernet Features

• Supports two 10/100/1000Base-T electrical interface and two 1000Base-X optical interface
• Synchronous Ethernet (SyncE) and IEEE 1588v2 (Precision Time Protocol) measurement
• RFC 2544: Throughput, Latency, Packet Delay Variation, Frame Loss, and Back-to-Back (symmetrical and asymmetric results)
• Ethernet BERT: Layer 1 to Layer 4
• Y.1564: Service configuration & performance measurement
• Stream traffic generation and analysis up to 10 streams
• Smart Loopback for Layer 1 to Layer 4
• VLAN (Q-in-Q) support
• MPLS support
• Packet Delay Variation measurement
• Cable Diagnostics and Optical Power testing
• IPv6 support
• Ping, Trace Route
• CSV and PDF result files

E1 Features

• 2.048 Mbit/s transmit and receive
• ITU-T G.821, G.826, and M.2100
• LOS, LOF, and AIS warring measurement
• 75Ω unbalanced and 120Ω balanced support
• Error injection / alarm generation

 

 

Applications

• Business Services Installation
• Wireless backhaul service verification
• Metro Ethernet installation, activation, & maintenance
• Point-to- point Service Activation
• Real-time online fault diagnosis

 

 

---

 

상세설명 (Description)

 

New from Deviser Instruments, the TC602RE is a handheld Ethernet backhaul service tester that supports testing for speeds up to 1Gbps. The TC602RE adds a suite of E1, SyncE, and IEEE 1588v2 testing functions for even wider utility. It's the next generation of telecommunication systems analysis, serving the growing need for high-speed metropolitan access at unmatched cost performance.

 

---

 

 

 

---

 

Technical specifications

Optical Port
SFP port x2
Available Wavelength	850nm, 1310nm & 1550nm (see below)
	1000Base-SX	100Base-TX	1000Base-T
Wavelength (nm)	850	1310	1550
Tx Level (dBm)	-9 ~ -3	-9 ~ -3	0 ~ +5
Rx Level Sensitivity (dBm)	-20	-22	-22
Transmission Distance	550m	10Km	80Km
Transmission Bit Rate (Gbit/s)	1.25
Receiving Bit Rate (Gbit/s)	1.25
Tx Working Wavelength Range (nm)	830 ~ 860	1270 ~ 1360	1540 ~ 1570
Test Accuracy
Frequency (ppm)	±4.6
Optical Power (dB)	±2
Jitter Compliance	IEEE802.3
Ethernet Type	IEEE802.3
Connector	LC
Transceiver Type	SFP
Electrical Port
Two ports: 10/100/1000 Base-T Full duplex
Auto/manually detecting straight-through/cross cable
	10Base-T	10Base-TX	100Base-T
Tx Bit Rate	10Mbit/s	100Mbit/s	1Gbit/s
Tx Accuracy (ppm)	±4.6	±4.6	±4.6
Rx Bit Rate	10Mbit/s	100Mbit/s	1Gbit/s
Rx Test Accuracy (ppm)	±4.6	±4.6	±4.6
Duplex Mode	Full duplex	Full duplex	Full duplex
Jitter Compliance	IEEE802.3	IEEE802.3	IEEE802.3
Connector	RJ-45	RJ-45	RJ-45
Max. Distance (m)	100	100	100
E1 Port
75 Ω unbalanced BNC × 2; 120 Ω balanced RJ48 × 1
Line Rate and Code	2.048 Mbps, HDB3 and AMI
Compliance	ITU-T G.703
General
Size	179mm x 145mm x 56mm (7.0" x 5.7" x 2.2")
Display	5" 800x480 color LCD touchscreen
Weight (with battery)	0.8kg (1.8lbs)
Working Temperature	-10ºC ~ 50ºC
Storage Temperature	-20ºC ~70ºC
Relative Humidity	0% to 95% (non-condensation)
External Port	USB, Ethernet port
Working Time	~3.5 hrs
Charging Time	5h from fully discharged to fully charged
Language	English, Chinese