
[RION NL-53] Sound Level Meter / 진동 소음계
주요특징 (Features)
• IEC 61672-1:2013 class 1, JIS C 1516:2020 class 1, JIS C 1509-1:2017 class 1를 포함한 다양한 규격을 준수
• 공장, 기계 및 개인 주변에서 발생하는 소음을 측정시 사용
• 별도 판매되는 옵션 NX-43WR을 사용하여 소리를 녹음하고 PC에서 재생
• 전용 PC 소프트웨어 AS-60을 사용하여 소리를 재생하고 불필요하다고 판단되면 계산에서 소리를 제외하고 다시 계산
• 언어 선택 기능이 있는 컬러 LCD 터치 패널이 장착, 쉽게 조작
• 방수 메커니즘이 있어 갑작스러운 비나 예상치 못한 물에 노출되어 발생하는 오작동을 줄였습니다.
• 측정 데이터는 SD 카드(최대 1000시간)에 저장
• 데이터는 전용 PC 소프트웨어 AS-60 또는 시중에서 판매하는 스프레드시트 소프트웨어를 사용하여 처리 및 편집
• NL-53에는 새로운 LAN 통신 기능이 탑재되어 PC나 스마트폰의 웹 브라우저에서 NL-43을 제어하고 측정 데이터를 수집
• NL-53에서 멀리 떨어진 곳에서도 측정을 관리할 수 있습니다.
▣ 모델라인업
| 모델 | 내용 | ||
|---|---|---|---|
| NL-43 | 2등급 소음계 | ||
| NL-53 | 1등급 소음계 | ||
| NL-63 | 저주파 소음 측정이 가능한 Class 1 소음계 | ||
| NL-43EX | 2등급 소음계, NX-43EX 사전 설치 | ||
| NL-53EX | 1등급 소음계, NX-43EX 사전 설치 | ||
Technical Specifications
| model | class1 Soud Level Meter NL-63 | class1 Soud Level Meter NL-53 | class2 Soud Level Meter NL-43 | |||
|---|---|---|---|---|---|---|
| Applicable standards | IEC 61672-1:2023 class1, ISO 7196:1995, ANSI/ASA S1.4-2014/Part1 class, JIS C 1509-1:2017 class1, JIS C 1516:2020 class1, ISO7196:1995 | IEC 61672-1:2023 class1, ANSI/ASA S1.4-2014/Part1 class, JIS C 1509-1:2017 class1, JIS C 1516:2020 class1 | IEC 61672-1:2023 class2, ANSI/ASA S1.4-2014/Part1 class 2, JIS C 1509-1:2017 class2, JIS C 1516:2020 class2 | |||
| CE Marking • EMC Directive Directive 2014/30/EU EN 61326-1:2013 • RoHS Directive Directive 23011/65/EU EN IEC 63000:2018 • Low Voltage Directive Directive 2014/35/EU EN 61010-1:2010/A1:2019 UKCA Marking, China RoHS, KC mark, VCCI Class B |
● | ● | ||||
| Measurement function | Simultaneous measurement of up to four conditions (Main channel, Sub1 to Sub3 channels) with selected time weighting and frequency weighting | ● | ● | |||
| Instantaneous value | Time-weighted sound pressure level Lp | ● | ● | |||
| Calculated value | Equivalent continuous sound level: Leq, L-time-weighted equivalent continuous sound level: Lleq, Moving Leq:Leq, mov | Equivalent continuous sond level :Leq, L-time-weighted equivalent continuous sound level: Lleq *2 | ||||
| Sonnd exposure level:LE, Maximum sound level:Lmax, Mimimum sound level:Lmein, Percentile sound level:LN | Moving Leq : Leq,mov*2, sound exposure level: LE, Maximum soun dlevel : Lmax, Minmum sound level : Lmin | |||||
| Peak sound level: Lpeak, Takt-max sound level:Ltm5 | Percentile sound level : LN, Peak sound level : Lpeak, Takt-max sound level : Ltm5 | |||||
| Microphone | Type | UC-59L | UC-59 | UC-52 | ||
| Sensitivity level (representative value) | -27 dB | -27 dB | -33 dB | |||
| Measurement level range | A-weighting : 25 dB to 138 dB, C-weighting : 33 dB to 138 dB, G-weighting : 43 dB to 138 dB, Z-weighting : 50 dB to 138 dB | A-weighting : 25 dB to 138 dB, C-weighting : 33 dB to 138 dB, Z-weighting : 38 dB to 138 dB | ||||
| C-weighted peak sound level : 60 dB to 141 dB, Z-weighted peak sound level : 65 dB to 141 dB | C-weighted peak sound level : 55 dB to 141 dB, Z-weighted peak sound level : 60 dB to 141 dB | |||||
| Self-generated noise | A-weighting | 17 dB or less | 17 dB or less | 19 dB or less | ||
| C-weighting | 25 dB or less | 25 dB or less | 27 dB or less | |||
| Z-weighting | 42 dB or less | 30 dB or less | 32 dB or less | |||
| G-weighting | 35 dB or less | ━ | ━ | |||
| Measurement frequency range | A, C, G, Z | A, C, Z | ||||
| Filter | Digital processing | High-pass filter Low-pass filter Cutoff frequency: 100 Hz, 500 Hz |
━ | ━ | ||
| Time weighting | F(Fast), S(Slow), I(Impulse), 10s | F(Fast), S(Slow), I(Impulse) *2 | ||||
| Input range | Automatic switching | ● | ● | |||
| Bar graph display | Upper range | 70 dB to 130 dB can be set in 10 dB increments | ● | ● | ||
| Lower range | 20 dB to 60 dB can be set in 10 dB increments | ● | ● | |||
| Sampling interval | LP, Leq, LE, Lmax, Lmin, Lpeak, Lleq : 20.8 μs (Sampling frequency: 48kHz), LN: 100mx (LP), 1 s (Leq), Leq move: 1s (Lleq), Ltm5 : 5S(Lmax) | ● | ● | |||
| Calibration | A reference signal is input using sound calibrator NC-75/NC-74 or pistonphone NC-72B/NC-72A, and the signal input sensitivity is adjusted. Up to 30 calibrations can be managed in the calibration history, and saved to an sD card |
● | ● | |||
| Reference signal output to external devices | Frequency | 1 kHz | ● | ● | ||
| Output level | Bar graph upper limit -6 dB | ● | ● | |||
| Correction function | Windscreen correction function | Corrects the influence on the frequency response when the windscreen in installed. | ● | ● | ||
| Diffuse sound field crrention function | Corrects the influence on the frequency response when used in a diffuse sound field. | ● | ● | |||
| Delay time | After the operation to start measuring, the device starts measuring after the specified time elapses (OFF, 1, 3, 5 10s) | ● | ● | |||
| Store | Manual store | Data for measurement results results are stored manually in single address increments. | ● | ● | ||
| Number of data | Internal memory : max. 1000 sets SD Card : depends on the capacity of the SD Card*1 |
● | ● | |||
| Measurement time | 10 s, 1, 5, 10, 15, 30 m, 1, 8, 24 h, User Setting (1s to 24h) | ● | ● | |||
| Data format | CSV file | ● | ● | |||
| Data recall | Browses stored data and screenshot images | ● | ● | |||
| Memorizing Settings | Setting information can be saved to the internal memory or SD card and recalled at startup or at a specified time | ● | ● | |||
| Waveform recording*2*3 | File format | Uncompressed waveform WAVE file | ● | ● | ||
| Sampling frequency | Select 48 kHz, 24 kHz, 12 kHz, 1200 Hz or 240 kHz | select 48 kHz, 24 kHz or 12 kHz | ||||
| Data length | Select 24 bit or 16 bit | ● | ● | |||
| Outputs | AC output | Output voltage : 1 V rms at the output level range | Enables simultaneous output of DC output and AC output | ● | ● | |
| DC output | Output voltage : 2.5 V, 25 mV/dB at the output level range | ● | ● | |||
| Otput range | Can be linked to the bar graph upper limit, or set from 70 dB to 130 dB in 10 dB increments | ● | ● | |||
| Comparator *2 | The comparator output turns on when the specified channel exceeds the set level (Maximum input voltage 24 V, internal resistance approx. 480Ω, Allowable power dissipation 300mV) |
● | ● | |||
| RS-233C communication | Measurement values can be acquired and settings can be changed by using communication commands | ● | ● | |||
| USB | Communication | Measurement values can be acquired and settings can be changed by using communication commands | ● | ● | ||
| Data transfer | Enables the transferring of data by marking the computer recognize the SD card as a removable disk | ● | ● | |||
| LAN *2 | Communication | Measurement valuse can be acquired and settings can be changed by using communication commands | ● | ● | ||
| Data transter | Data on an SD card can be transfered to a computer | ● | ● | |||
| Web browser display | Via a Web browser, settings can be changed and measured values displayed. Via Google Chrome on PC, audio can be played. *3 | ● | ● | |||
| Data continuous output *2 | type of data | Instantaneous value | LP | ● | ● | |
| Processed value | Leq, Lmax, Lmin, Lpeak | ● | ● | |||
| Output interval | 100 ms (0.1s) | ● | ● | |||
| Power supply | 4 x AA batteries, power supply to DC jack and USB port | ● | ● | |||
| Operating time (at 23℃, ECO setting) |
Alkaline battery LR : 6 : Approx. 12 hours *Wen making Auto store mode and ECO settings |
Alkaline battery LR : 6 : Approx. 16 hours *Wen making Auto store mode*2 and ECO settings |
||||
| AC adapter | NE-21P (Input : 100 to 240 V AC, 56/60 Hz, output : 12V DC) | ● | ● | |||
| External power supply voltage | 5.7 V to 15 V (rated voltage 12V) | ● | ● | |||
| Primary side (100V side) power consumption | Approx. 3 W (with NE-21P usage) | ● | ● | |||
| Operating temperature and humidity range | Temperature | -10℃ to 50℃ | ● | ● | ||
| Humidity | 10% to 90% RH (no condensation) | ● | ● | |||
| Dustproof and waterproof performance *4 | IP rating : IP54 (excluding microphone) | ● | ● | |||
| Dimensions, weight | Approx. 265mm(H) x 83.5mm(W) x 34.5mm(D) approx. 400g (including batteries) |
Approx. 258mm(H) x 83.5mm(W) x 34.5mm(D) approx. 400g (including batteries) |
||||
*1 Use Rion fully guaranteed products.
|
||||||
Accessary
| 기본 악세사리 |
|---|
| • Carrying case x1 • Windscreen WS-10 x1 • Windscreen fall prevention rubber x1 • Hand strap x1 • Size AA alkaline batteries x4 • SD card 512MB (NX-43EX preinstalled model only) |


- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
|
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
| |
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?