[Tektronix AFG1000 Series] 임의/함수 발생기 / Arbitrary Function Generator
주요특징 (Features)
• 듀얼 채널, 대역폭 25MHz, 출력 1mVpp ~ 10Vpp, 수직 해상도 14비트, 주파수 분해능 1uHz
• 연속, 변조, 스위프, 버스트 모드를 포함한 50가지의 내장 임의 파형
• 전용 3.95" TFT LCD 디스플레이, 탐색하기 쉬운 전면패널 및 메뉴
• 내장 200MHz, 여섯 자리 주파수 카운터
• 표준 5년 보증
• 정밀한 파형을 생성하여 정확한 실험 결과를 확보할 수 있습니다.
• 실험실에서 필요한 여려 형태의 파형을 생성합니다.
• 간편하게 기능을 사용 할 수 있습니다.
• 별도의 주파수 카운터 없이 주파수, 주기, 펄스 폭, 듀티 사이클을 정확하게 측정할 수 있습니다.
• 텍트로닉스의 제품 품질과 서비스로 뛰어난 사용자 환경이 보장됩니다.
▣ 애플리케이션
• 전기전자 실험
• 통신 실험
• 센서 시뮬레이션
• 기능 테스트
▣ 모델별 사양
모델 | AFG1022 | AFG1062 |
---|---|---|
아날로그 대역폭 | 25MHz | 60MHz |
아날로그 채널 | 2 채널 | 2 채널 |
출력 주파수 | 1 uHz - 25 MHz | 1uHz - 60MHz |
샘플링 속도 | 125MS/s | 300MS/s |
레코드 길이 | 8k 포인트 | |
수직 해상도 | 14비트 |
상세설명 (Description)
25MHz 또는 60MHz의 대역폭, 2개의 출력 채널, 전체 대역폭에서 1mVpp ~ 10Vpp의 출력 진폭을 제공하는 Tektronix AFG1000 임의/함수 발생기는 실험실에서 필요한 모든 파형을 생성합니다. 가장 중요한 것은 텍트로닉스의 임의 함수 발생기 제품 중에서 최고의 가격 대비 가치를 제공한다는 사실입니다.
▣ Performance and features
1 μHz to 25 MHz or 60 MHz sine waveform range, with 12-digit or 1 μHz resolution and a ±1 ppm drift high stability time base, provides great signal fidelity in the frequency domain. With 1 mVp-p to 10 Vp-p output amplitude range, and 14-bit or 1 mVp-p resolution over the whole frequency range,
there is no need to compromise between output amplitude and frequency any more.
Four different run modes cover most use cases with a cost effective solution. 50 most-frequently used standard and arbitrary waveforms are built-in for easy access. Up to 1 M points arbitrary waveforms memory enables users to replicate real world signals captured with a Tektronix
oscilloscope or defined with ArbExpress. The built-in 200 MHz and 6-digit resolution frequency counter is an easy and precise way to measure frequencies/periods/pulse widths/duty cycles.
▣ Ease of use
The high-resolution 3.95-inch color TFT display shows relevant settings and parameters in both text and graphic formats, which give users full confidence in their settings, and let them focus on the task at hand. The front panel shortcut buttons and rotary knob make accesses to most frequently used functions and settings with minimum effort and time. The built-in 64-MByte non-volatile memory together with USB stick memory interface, provide unlimited space for user-defined waveform storage.
▣ Software and solutions
The user-defined arbitrary waveforms generated by the free ArbExpress software can easily be loaded on the AFG1000 with a USB memory stick.
As a building block of Tektronix educational solution, the AFG1000 can be embedded into TekSmartLab and enable a cost efficient and effective way of teaching, learning, and lab management.
Technical specifications
Channels | 2 채널 | ||
---|---|---|---|
Built-in waveforms | Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms | ||
General characteristics | |||
Model | AFG1022 | AFG1062 | |
Sine waves | |||
Range | 1 μHz to 25 MHz | 1 μHz to 60 MHz | |
Sine wave in burst mode | 2 mHz to 25 MHz | 2 mHz to 30 MHz | |
Effective maximum frequency out | 25 MHz | 60 MHz | |
Amplitude flatness (1 Vp-p), typical | <10 MHz | ±0.4 dB | ±0.5 dB |
≥10 MHz and ≤25 MHz | ±0.7 dB | ||
≥10 MHz and ≤60 MHz | ±0.9 dB | ||
Harmonic distortion (1 Vp-p) | ≤10 MHz | < -50 dBc | < -60 dBc |
>10 MHz | < -50 dBc | < -47 dBc | |
Total harmonic distortion | < 0.2% (10 Hz to 20 kHz, 1 Vp-p) | ||
Spurious (1 Vp-p), typical | < -45 dBc | ||
Phase noise, typical | 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p | ||
Residual clock noise, typical | -57 dBm | ||
Square wave | |||
Range | 1 μHz to 12.5 MHz | 1 μHz to 30 MHz | |
Rise/fall time, typical | <12 ns | <10 ns | |
Jitter (rms), typical | <1 ns | <500 ps | |
Overshoot | <5% | ||
Ramp wave | |||
Range | 1 μHz to 1 MHz | 1 μHz to 2 MHz | |
Linearity, typical | ≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry | ||
Symmetry | 0.0% to 100.0% | ||
Pulse wave | |||
Range | 1 μHz to 12.5 MHz | 1 μHz to 30 MHz | |
Pulse width range | 40 ns to 999 ks | 17 ns to 999 ks | |
Pulse width resolution | 1 ns or 4 digits | ||
Pulse duty | <1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply) | ||
≥1 MHz, 50% fixed | ≥1 MHz, 50% fixed | ||
Edge transition time, typical | <12 ns, fixed | <10 ns, fixed | |
Overshoot, typical | <5% | ||
Jitter (rms), typical | <1 ns | <500 ps | |
Noise | |||
Noise bandwidth (-3 dB) | 25 MHz | 50 MHz | |
Noise type | White Gausian | ||
DC | |||
Range | -5 V to +5 V, 50 Ω load | ||
-10 V to + 10 V, open circuit or high Z load | |||
Arbitrary waveform | |||
Range | 1 μHz to 10 MHz | 1 μHz to 30 MHz | |
Arbitrary waveform in burst mode | 2 mHz to 10 MHz | 2 mHz to 30 MHz | |
Effective analog bandwidth (-3 dB) | 30 MHz | 60 MHz | |
Non-volatile memory | 64 MByte | ||
Memory | Length | 2 to 8,192 | 2 to 1 M-point |
Sampling rate | 125 MS/s | 300 MS/s | |
Vertical resolution | 14 bits | ||
Rise and fall time | < 10 ns | < 8 ns | |
Jitter (rms), typical | < 6 ns | ||
Frequency | |||
Resolution | 1 μHz or 12 digits | ||
Internal reference stability | ±1 ppm at 0 - 40 °C | ||
Internal reference aging | ±1 ppm per year | ||
Amplitude | |||
Range (50 Ω load) | ≤25 MHz | 1 mVp-p to 10 Vp-p | 1 mVp-p to 10 Vp-p |
>25 MHz | ― | 1 mV p-p to 5 V p-p | |
Range (Open circuit or high Z load) | ≤25 MHz | 2 mVp-p to 20 Vp-p | 2 mV p-p to 20 V p-p |
>25 MHz | ― | 2 mV p-p to 10 V p-p | |
Accuracy | ±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset) | ||
Resolution | 1 mVp-p, 1 mVrms or 4 digits | ||
Units | Vp-p, Vrms | ||
Output impedance | 50 Ω (typical) | ||
Local impedance setting | Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance) | ||
Isolation | No floating ground, signal ground connected to chassis ground | ||
Signal output protection | Short-circuit tolerance, main output automatically disabled when over current | ||
DC offset | |||
Range | ±(5 VpK – Amplitudep-p/2), 50 Ω load ±(10 VpK – Amplitudep-p/2), open circuit or high Z load |
||
Accuracy | ±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))v | ||
Resolution | 1 mV or 4 digits | ||
Modulation | |||
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes |
|||
Amplitude modulation | Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | Sine, square, ramp, noise, arbitrary | ||
Internal AM frequency | 2 mHz to 20 kHz | ||
Depth | 0.0% to 100.0% | ||
Frequency modulation | Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | Sine, square, ramp, noise, arbitrar | ||
Internal modulating frequency | 2 mHz to 20 kHz | ||
Frequency deviation | (limited by carrier waveform type) | ||
2 mHz to 12.5 MHz | 2 mHz to 30 MHz | ||
Phase modulation | Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | Sine, square, ramp, noise, arbitrary | ||
Internal PM frequency | 2 mHz to 20 kHz | ||
Phase Deviation | 0° to 180° | ||
Amplitude shift keying (AFG1062 only) |
Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | 50% duty cycle square | ||
ASK rate | 2 mHz to 100 kHz | ||
Frequency shift keying | Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | 50% duty cycle square | ||
FSK rate | 2 mHz to 100 kHz | ||
Phase shift keying (AFG1062 only) |
Carrier waveforms | Sine, square, ramp, arbitrary, except DC and noise | |
Source | Internal / external | ||
Internal modulating waveforms | 50% duty cycle square | ||
PSK rate | 2 mHz to 100 kHz | ||
Pulse width modulation (AFG1062 only) |
Carrier waveforms | Pulse, ≤1 MHz | |
Source | Internal / external | ||
Internal modulating waveforms | Sine, square, ramp, arbitrary, except DC and noise | ||
PWM frequency | 2 mHz to 20 kHz | ||
Deviation | 0.0% to 50.0% of pulse period | ||
Sweeping | |||
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes |
|||
Carrier waveforms | Sine, square, ramp, arbitrary (AFG1062 only) | ||
Minimum start-stop frequency | 1 μHz | ||
Maximum start-stop frequency | Sine | 25 MHz | 60 MHz |
Square | 12.5 MHz | 30 MHz | |
Ramp | 1 MHz | 2 MHz | |
Type | Linear, logarithmic | ||
Direction | Up / down | ||
Sweep time | 1 ms to 500 s ± 0.1% | ||
Trigger sources | Internal, external, or manual | ||
Burst | |||
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes. |
|||
Waveforms | Sine, square, ramp, pulse, arbitrary except DC and noise | ||
Types | count (1 to 50,000 cycles), infinite, gated | count (1 to 1,000,000 cycles), infinite, gated | |
Start phase | -360° to +360° | ||
Trigger sources | Internal, external, or manua | ||
Internal trigger interval | (40 ns or (cycles x period) to 500 s) ± 1% | ||
Gate source | External trigger | ||
Frequency counter | |||
Function | Frequency, period, positive pulse width, duty cycle | ||
Frequency range | 100 mHz to 200 MHz | ||
Frequency resolution | 6 digits | ||
Coupling mode | AC, DC | ||
Voltage Range and Sensitivity, DCcoupled (non-modulation signal) | 100 mHz to 100 MHz | 250 mVMp-p to 5 Vp-p (AC + DC) | |
100 MHz to 200 MH | 450 mVp-p to 3 Vp-p (AC + DC) | ||
Voltage range and sensitivity, AC coupled (non-modulation signal) | 1 Hz to 100 MHz | 250 mVp-p to 5 Vp-p | |
100 MHz to 200 MHz | 450 mVp-p to 4 Vp-p | ||
Pulse width and duty cycle measure | 1 Hz to 10 MHz | ||
Input impedance | 1 M Ω in parallel with 100 pF | ||
High frequency noise restraint (HFR) | On / Off (HFR frequency = 500 kHz) | ||
Sensitivity | Low, middle, or high | ||
Trigger level range | -2.5 V to +2.5 V | ||
Auxiliary inputs and outputs | |||
External modulation input | Input frequency range | DC to 20 kHz | |
Input voltage range | All except FSK: ±1 V full scale, FSK: 3.3 V logic level | ||
Input impedance | 12 kΩ (typical) | ||
External trigger input | Level | TTL-compatible | |
Slope | Rising or falling (selectable) | ||
Pulse Width | >100 ns | ||
External reference clock input | (Shared with Frequency Counter Input) | ||
Impedance | 400 Ω, AC coupled | ||
Requested Input voltage swing | 100 mVp-p to 5 Vp-p | ||
Locking range | 10 MHz ±9 kHz | ||
External reference clock output | Frequency | 10 MHz | |
Impedance | 10 MHz | ||
Amplitude | 1.6 Vp-p into 50 Ω load | ||
Communication interface | USB | Host and device, USB TMC compliance | |
Display | Display type | 3.95-inch | |
Display resolution | 480 by 320 | ||
Display colors | 65,536 | ||
Menu and online help languages | |||
Menu and online help languages | English and Simplified Chinese | ||
Power source | |||
Supply | 220-240 VAC, 100-120 VAC, 50/60 Hz, CATⅡ | ||
Consumption | Less than 28 W | Less than 35 W | |
Fuse | 110 V: 250 V, F1AL 220 V: 250 V, F0.5AL |
||
Warm-up time | 30 minutes (typical) | ||
Physical characteristics | |||
Dimensions (W, H, D) | 230 × 110 × 306 mm (9.0 × 4.4 × 12.1 in) | ||
Weight | Net | 3.4 kg (7.5 lbs) | |
Shipping | 4.7 kg (10.3 lbs) | ||
EMC environment and safety | |||
Temperature | Working | 0 ℃ to 40 ℃ (32 °F to 104 °F) | |
Storage | -20 ℃ to 60 ℃ (-4 °F to 144 °F) | ||
Relative humidity (noncondensing) | Operating: ≤ 80%, +0 °C to +40 °C (+32 °F to +104 °F) Non-operating: 5% to 90%, < +40 °C (+104 °F) Non-operating: 5% to 80%, ≥ +40 °C (+104 °F) to ≤ +60 °C (+140 °F) |
||
Altitude | Operating: up to 3,000 m (9843 ft.) Non-operating: up to 12,000 m (39,370 ft) |
||
Cooling method | Fan cooling | ||
EMC compliance | European Union | EN 61326-1 | |
Australia/NZ | CISPR 11, Class A | ||
EMC environment and safety | Safety compliancev | UL 61010-1 CAN/CSA-C22.2 No. 61010-1 EN 61010-1 IEC 61010-1 |
- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
- 저희 텍캄몰에서 구매하신 제품과 상품은 정품으로 본사 및 전문점에서 A/S를 받을 수 있습니다.
- 무상 A/S기간에 상관없이 밴드교체 및 유리교체 등 소모품성 및 고객님의 부주의로 인한 파손은 유상 A/S(비용청구)로 처리됩니다.
- A/S 처리방법은 매장으로 방문하시거나 전화해 주시고, 우편이나 택배이용시 배송료는 본인 부담입니다.
- A/S 처리기간은 고장상태와 부품조달 관계로 1주일에서 최장 3개월까지 걸릴 수 있습니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?