[EXFO FTB-7200D] OTDR 모듈 / LAN/WAN Access OTDR
EXFO FTB-7200D LAN/WAN Access OTDR

주요특징 (Features)

플랫폼: FTB-2 Pro/FTB-500

광통신, Ethernet 및 멀티서비스 테스트 분야에서 최고의 성능 제공/
멀티모드와 싱글모드 광선로 테스트에 최적화된 OTDR 모듈

• 파장: 850/1300/1310/1550nm
• MM, SM 4파장을 한 모듈에서 사용
• 측정거리: 기본 260km 이상 (SMF28의 경우)
• 이벤트 데드존: 1m
• 감쇄 데드존: 3/4/4.5/5m
• 다이나믹 레인지: >36dB
• 샘플링포인트 수: 128,000
• 최소 측정거리(분해능): 4cm

상세설명 (Description)

Housed in a full-size portable platform, this OTDR is ideal to maximize efficiency of fiber installers testing multimode and singlemode fibers.

EXFO Connect

AUTOMATE ASSET MANAGEMENT. PUSH TEST DATA IN THE CLOUD. GET CONNECTED.
EXFO Connect pushes and stores test equipment and test data content automatically in the cloud, allowing you to streamline test operation from build-out to maintenance.

ADDITIONAL SOFTWARE TEST CAPABILITIES ON THE FTB-200 PLATFORM

VOIP TEST TOOLS

EXpert VoIP generates a voice-over-IP call directly from the test platform to validate performance during service turn-up and troubleshooting.
• Supports a wide range of signaling protocols, including SIP, SCCP, H.248/Megaco and H.323
• Supports MOS and R-factor quality metrics
• Simplifies testing with configurable pass/fail thresholds and RTP metrics

EXPERT IP TEST TOOLS

EXpert IP integrates six commonly used datacom test tools into one platform-based application to ensure that field technicians are prepared for a wide range of testing needs.
• Rapidly performs debugging sequences with VLAN scan and LAN discovery
• Validates end-to-end ping and traceroute
• Verifies FTP performance and HTTP availability

IPTV TEST TOOLS

This powerful IPTV quality assessment solution enables set-top-box emulation and passive monitoring of IPTV streams, allowing quick and easy pass/fail verification of IPTV installations.
• Real-time video preview
• Analyzes up to 10 video streams
• Comprehensive QoS and QoE metrics including MOS score

TROUBLESHOOTING OF HIGH-SPEED MULTIMODE NETWORKS WITH ENCIRCLED FLUX

Whether it’s for an expanding enterprise-class business or a large-volume data center, new high-speed data networks built with multimode fibers are running under tighter tolerances than ever before. In case of failure, intelligent and accurate test tools are needed to quickly find and fix the fault.

Multimode fibers are the trickiest links to test because the test results are highly dependent on each device’s output conditions. Troubleshooting with a different unit than the construction unit may mislead the technician or result in the inability to find the fault, creating longer network downtimes.

For multimode fibers, EXFO recommends using an external launch mode conditioner that is encircled flux (EF) compliant. The encircled flux standard (as recommended in TIA-568 via TIA-526-14-B and IEC 61280-4-1 Ed. 2.0) is a way of controlling the source launch conditions so that Tier-2 troubleshooting can be performed with maximum accuracy and consistency.
The use of an external EF-compliant device* such as the SPSB-EF-C30 will ensure a fast and easy way to fix faulty networks.

Specification Sheets

FTB-7200D  

The ideal construction OTDRs for everyday testing in any access network as well as in LAN/WAN networks

Key Features

• Dynamic range of up to 36 dB
• Event dead zone as low as 0.8 meter
• Combined singlemode/multimode wavelengths (12CD-23B model)
• Integrated tool: combines a visual fault locator, inspection probe, broadband power meter and a CW source mode
• Controlled launch conditions for more accurate loss measurements
• Live fiber testing at 1625 nm (FTB-720 only)

Applications

• Access network testing
• LAN/WAN characterization

Technical specifications