[EXFO FTB-730G V2] OTDR & 이더넷모듈/ OPTICAL, ETHERNET AND MULTISERVICE TESTER
EXFO FTB-730G V2 OPTICAL, ETHERNET AND MULTISERVICE TESTER

주요특징 (Features)

플랫폼: FTB-1V2, FTB-1V2 Pro

단 하나의 장비로 OTDR과 Ethernet을 모두 측정할 수 있는 모듈

[OTDR]
• iOLM-Ready: 원터치 클릭으로 전문가 수준의 OTDR 트레이스 분석
• 다이나믹 레인지: 36~39dB
• 1*128 스플리터 테스트
• 이벤트 데드존: 0.8m

[Ethernet 측정기]
• SONET/SDH, OTN, Ethernet을 11.3G까지 지원
• FTTA Validation: CPRI, OBSAI를 3.1G까지 BER 테스팅
• 파이버 채널 네트워크를 1x/2x/4x/8x/10x까지 지원
• OTN 테스팅(ITU-T G.709)

▣ FTB-700G V2 Model

상세설명 (Description)

Industry’s Smallest and Most Comprehensive 10G Handheld Tester

Leveraging the powerful, intelligent FTB-1 Pro handheld test platform, the FTB-700G V2 Series is truly an all-in-one test solution which combines Ethernet service validation, connector endface inspection, fiber characterization testing , CPRI link validation and RF spectrum analysis over CPRI, into a single module.

The FTB-700G V2 integrates all testing functionalities required to effectively activate, validate, troubleshoot and maintain fixed and mobile networks including: centralized RAN (C-RAN), distributed antenna system (DAS), small cells, fiber-to-the-X (FTTx), fronthaul, backhaul and data center networks.

The FTB-700G V2 Series is the only testing solution specifically designed to help field technicians do more, faster and with first-time-right results, while enabling mobile network operators to improve operational efficiency and optimize network performance.

The Ultra-Portable Choice for
Multiservice Testing

Optical Testing

Removing Complexity from the OTDR
Using a unique and patented automated multipulse and multiwavelength acquisition approach, the field-proven iOLM surpasses the traditional OTDR and linear view, providing expert-level link characterization of any fiber network.
This dynamic OTDR-based application uses EXFO’s most advanced algorithms to deliver detailed information and maximum resolution on every element of the link. Thanks to its unmatched intelligence and simplicity, the iOLM converts complex OTDR tests into clear and accurate go/no-go results through single-button operation.

Multiservice Testing

Powerful Yet Simple
The FTB-700G V2 Series is a fully integrated DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel, CPRI and Ethernet services handheld tester with an 8-inch multitouch screen delivering unprecedented configuration simplicity. Thanks to EXFO’s highly intuitive graphical user interface (GUI), streamlined procedures and predefined configurations, the FTB-700G V2 requires minimal to no training for new users. Furthermore, platform connectivity is abundant via Wi-Fi, Bluetooth, Gigabit Ethernet and USB ports, making it accessible in any environment and at any time, thereby reducing truck rolls and unnecessary dispatching of field technicians.

Radio Frequency (RF) Spectrum Analysis Over CPRI

Unmatched on the Market
With EXFO’s OpticalRF™ application, dangerous and difficult climbs can be eliminated by providing access to RF signals through the digital CPRI link available at the BBU site – which can be at the bottom of the tower or at the BBU hotel located kilometers away (C-RAN architecture). The digital link uses the CPRI protocol to carry RF signals in digital format (IQ data). By accessing the IQ data at the BBU location, the costs associated with truck rolls and tower climbs are reduced. In addition, time to resolution of complex RF issues is accelerated by enabling multi-user collaboration via remote access capabilities to the OpticalRF™ application from any smart device or laptop.

Specification Sheets

 FTB-700G V2 Series  

PLATFORM HIGHLIGHT 

• Windows 8.1 (bring your own device, install what you want)
• Ultra-bright 8-inch multitouch screen
• Built-in connectivity—choose between Gigabit interface, Wi-Fi, Bluetooth and 3G or 4G LTE via USB dongle
• Lightweight and portable solution designed for field engineers or cell technicians who install, troubleshoot and maintain • wired and wireless networks
• OPTICAL TESTING
• Dynamic range up to either 36 dB or 39 dB Test through high-port-count splitters (up to 1 x 128)
• Combined singlemode/multimode wavelengths
• Event dead zone as low as 0.8 meters
• iOLM-ready: one-touch multiple acquisitions with clear go/no-go results presented in a straightforward visual format
• Integrated tool combines a visual fault locator, inspection probe, broadband power meter and a CW source mode

FTTA TESTING​ 

• CPRI base-station (BTS) emulation from 1.2G to 9.8G rates
• CPRI remote-radio-head (RRH) emulation from 1.2G to 9.8G rates
• CPRI framed and unframed BER from 1.2G to 9.8G rates with pseudo-random bit sequence (PRBS) stress patterns and latency measurements
• Service-disruption-time (SDT) measurements

MULTISERVICE TESTING​ 

• Dual-port testing up to 10G
• iSAM ultra-simple multiservice activation
• 10G multisession transmission-control-protocol (TCP) testing with bidirectional RFC 6349
• Power-over-Ethernet validation within cable test
• EtherSAM, RFC 2544, traffi c generation and monitoring, EtherBERT, Through mode, TCP throughput and Smart Loopback
• Packet synchronization including IEEE 1588 V2 precision time protocol (PTP) and SyncE
• Packet capture and advanced filtering up to 10G
• Fibre Channel 1x, 2x, 4x, 8x, 10x support
• OTN testing OTU-1/2, OTU-1e/2e
• Optical SONET and SDH testing up to 10G
• Electrical SONET and SDH testing
• DSn and PDH testing including ISDN PRI

THE ULTRA-PORTABLE CHOICE FOR MULTISERVICE TESTING

The ongoing transition towards a converged network infrastructure for optical, SONET/SDH, OTN, Fibre Channel and packet-based Ethernet services requires a test tool that can cover a wide range of interfaces and rates without sacrificing portability, speed or cost. Leveraging the powerful FTB-1 handheld platform, the FTB-700G V2 Series streamlines processes and empowers field technicians to efficiently test and validate optical networks, SONET/SDH, OTN, Fibre Channel, CPRI and Ethernet circuits.

MULTISERVICE POWERFUL AND FAST

The FTB-700G V2 Series offers a fully integrated DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel, CPRI and Ethernet handheld tester, and an 8-inch multitouch screen with unprecedented configuration simplicity. Platform connectivity is abundant via Wi-Fi, Bluetooth, Gigabit Ethernet and USB ports, making it accessible in any environment.

REVAMPED SETUP PROCEDURES

The new Test Configurator enables tests to be easily set up, and provides critical test information immediately after the actual setup stage. In the screenshot to the right, the RFC 2544 test was selected with Throughput and back-to-back tests enabled (frame loss and latency are disabled). The green arrow pointing up confirms that the link is up. The destination IP address is resolved and the test is ready to be executed. The Test Configurator covers all stages of testing: setup, review and execution.

The control panel has icons that provide access to the most important testing elements, buttons for the Setup, Results and Functions screens, as well as a clear pass/fail indicator. This gives field technicians the assurance that their testing time will be optimized.

MULTISERVICE

Setting a New GUI Standard: Unprecedented Simplicity in Configuration Setup and Navigation

The FTB-700G V2 Series intelligent situational configuration setup feature guides technicians through complete and accurate testing processes (e.g., suggestion prompts and help guides). This feature reduces navigation by combining associated testing functions on a single screen, and offers intelligent autodiscovery that enables a single technician to perform end-to-end testing.