[IDEAL Networks OTDR II ] OTDR II 테스터 / OTDR
IDEAL Networks OTDR II Tester
주요특징 (Features)
• iOLM-Ready: 원터치 클릭으로 전문가 수준의 OTDR 트레이스 분석
• 파장: 850/1300/1310/1550nm
• 다이나믹 레인지: 27/29/36/35dB
• 데드존
* EDZ: 0.5m(멀티) / 0.7m(싱글)
* ADZ: 2.5m(멀티) / 3m(싱글)
• 1625nm Live Fiber 테스트
• 광파워미터, 광손실측정기 (옵션)
• 파손이 적은 견고한 디자인
• 1.5kg의 가벼운 무게
• 7" LCD 터치스크린
• 12시간 배터리
상세설명 (Description)
Tier-2 Optical Time
Domain Reflectometer for Multimode and Single-mode
Fibre Cabling
The Ideal Networks OTDR II is the first tablet inspired OTDR that is handy, lightweight and rugged enough for any environment.
7-inch, outdoor-enhanced touch-screen.
Dynamic range of up to 36 dB in SM and 29 dB in MM.
iOLM: Converts complex graphs into easy to read diagrams.
Pass/Fail status for each event.
The most efficient hand held display in the industry, delivering an unprecedented user experience. Its intuitive user interface including on-board manual ensures a fast learning curve for the user. Plus, its new and improved OTDR platform offers icon-based functions, instant boot-up, automatic macro-bend finders as well as improved auto and real-time modes.
Key features:
• iOLM (Intelligent Optical Link Mapper) - automatic configuration and multiple measurements on the same link provides the best possible measurements regardless of fibre configuration
• Onboard PDF reporting
• Macro bend detection
• Short attenuation dead zone: MM: 2.5 m/SM: 3 m and event dead zone: MM: 0.5 m/SM: 0.7 m for accurate location and characterisation of events
• Quad wavelength (850/1300/1310/1550) for both multimode and single-mode testing
• Each fibre may be tested at two wavelengths in a single Autotest
• Provides results in only a few seconds
• Interchangeable fibre adapters with a wide variety of available configurations
• Transfer test results to PC via USB flash drives or USB cable
• Optional video inspection micro scope to check connectors for cleanliness or damage
• Provides simple PASS/FAIL results and macro bend detection in single-mode fibres that helps users identify bends or kinks in the cable, saving time during installation and troubleshooting
• Small size for one handed operation
• Rubber over-mould for enhanced drop protection
• 1 lithium-ion battery provides up to 12 hours operation
• Warranty is 1 year and we recommend an annual calibration
• Rugged carrying case for field use
Technical specifications
Display | 7 in (178 mm) outdoor-enhanced touchscreen, 800 x 480 TFT |
---|---|
Interfaces | Two USB 2.0 ports, RJ-45 LAN 10/100 Mbit/s |
Storage | 2 GB internal memory (20 000 OTDR traces, typical) |
Batteries | 2 GB internal memory (20 000 OTDR traces, typical) Rechargeable lithium-polymer battery 12 hours of operation as per Telcordia (Bellcore) TR-NWT-001138 |
Power supply | Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz, 9-16 V DCIN 15 Watts minimum |
Wavelength (nm) b | 850/1300/1310/1550 |
Dynamic range (dB) c | 27/29/36/35 |
Event dead zone (m) d | MM: 0.5, SM: 0.7 |
Attenuation dead zone (m) e | MM: 2.5, SM: 3 |
Distance range (km) | 0.1 to 260 for single-mode and 0.1 to 40 for multimode |
Pulse width (ns) | MM: 3 to 1000, SM 3 to 20 000 |
Linearity | (dB/dB) ±0.03 |
Loss threshold | (dB) 0.01 |
Loss resolution | (dB) 0.001 |
Sampling resolution (m) | 0.04 to 5 |
Sampling points | Up to 256 000 |
Distance uncertainty (m) f | ±(0.75 + 0.0025 % x distance + sampling resolution) |
Measurement time | User-defined (60 min. maximum) |
Reflectance accuracy | (dB) ±2 |
Typical real-time refresh (Hz) | 4 |
Laser safety | 1M |
Notes a. All specifications valid at 23 °C ± 2 °C with an FC/APC connector, unless otherwise specified. b. Typical. c. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1. d. Typical, for reflectance below –55 dB, using a 3-ns pulse. e. Typical, for reflectance below –55 dB, using a 3-ns pulse. Attenuation dead zone at 1310 nm is 4.5 m typical with reflectance below –45 dB f. Does not include uncertainty due to fiber index. |
|
General: | |
Size (H x W x D) | 166 mm x 200 mm x 68 mm (6 9/16 in x 7 7/8 in x 2 ¾ in) |
Weight (with battery) | 1.5 kg (3.3 lb) |
Temperature | Operating –10 °C to 50 °C (14 °F to 122 °F) |
Storage –40 °C to 70 °C (–40 °F to 158 °F) a | |
Relative humidity | 0 % to 95 % noncondensing |
Source (optional) | |
Output power (dBm) b | MM: -3 , SM: –6 |
Modulation | CW, 1 kHz, 2 kHz |
Built-In Power Meter (GeX - optional c) | |
Calibrated wavelengths (nm) | 850, 1300, 1310, 1490, 1550, 1625, 1650 |
Power range (dBm) d | 27 to —50 |
Uncertainty (%) e | ±5 % ± 10 nW |
Display resolution(dB) | 0.01 = max to —40 dBm |
0.1 = —40 dBm to —50 dBm | |
Automatic offset nulling range d, f | Max power to —30 dBm |
Tone detection (Hz) | 270/330/1000/2000 |
Visual Fault Locator (VFL) | |
Laser, 650 nm | ± 10 nm |
CW/Modulate | 1 Hz |
Typical Pout in 62.5/125 μm | > –1.5 dBm (0.7 mW) |
Laser safety | Class 2 |
Notes a. –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack. b. Typical output power is given at MM 1300nm, SM 1550 nm. c. At 23 ºC ± 1 ºC, 1550 nm and FC connector. With modules in idle mode. Battery operated after 20-minute warm-up. d. Typical. e. At calibration conditions. f. For ±0.05 dB, from 10 °C to 30 °C. |
- 배송비 : 1,000,000원 이상 구매시 무료배송이며, 미만 주문시 5,000원의 택배비가 청구됩니다.
도서, 산간지방 및 일부지역은 배송비가 추가될 수 있습니다.(퀵, 다마스 배송은 별도 문의부탁드립니다)
- 배송기간 : 배송은 일반적으로 결제후 2~7일이 소요됩니다.(토요일/공휴일 제외, 도서지역 4~8일)
특수제품, 주문제작 및 직수입 상품의 경우 별도 배송일을 안내해 드립니다.
배송예절일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과 차이가 발생할 수 있습니다.
- 본 상품의 배송 가능일은 15일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.
(단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환/환불 |
환불 |
교환 |
단순변심 |
고객님 부담으로 환불금액에서 왕복 배송비가 차감되어 환불됩니다. |
왕복 배송비 확인 후 박스에 동봉해서 보내주세요. - 일반적으로 교환이나 환불시 10,000원의 왕복배송비가 적용됩니다.(상품에 따라 상이 할 수 있습니다) - 재고가 없는 경우 환불처리 될 수 있습니다. |
제품하자 및 오배송 |
판매자 부담이므로 상품만 보내주시면 됩니다. |
교환/환불이 불가능 한 경우 |
|
환불/교환 요청기간 초과 |
환불/교환 기간 이후 요청하는 경우(배송완료 시점으로부터 15일 초과시) 단, 수령한 상품이 표기 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우에는 수령한 날로부터 3개월 이내, |
재고가 부족한 경우 |
단순변심으로 교환을 요청했으나, 재고가 부족한 경우(환불 처리 될 수 있습니다) |
특수제품/ 주문제작/ 직수입제품 |
주문/제작 상품의 제작이 이미 진행된 경우, 직수입 제품의 경우 주문서가 들어간 경우 |
분실/ 파손/ 고장/ 오염 발생 | 상품택/ 구성품 분실 및 취급 부주의로 인한 파손/고장/오염 등이 발생한 경우 |
모니터 해상도 차이 | 모니터 해상도 차이로 인하여 색상 등 이미지가 실제와 상이한 경우 |
기타 불가사유 | ① 제품박스가 손상되거나 찢어진 경우 ② 고유팩 포장을 분리하거나 훼손하였을 경우 ③ 렌즈에 이물질 및 지문등의 흔적이 남은 경우 |
<기타 불가 사유 참고 이미지>
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 15일이내 입니다.
- 일부 특수 제품, 주문제작 및 직수입 제품의 경우 교환/반품이 어려울 수 있습니다.
- 구매전 충분히 상담하시고, 신중하게 구매 해 주시기 바랍니다.
- 저희 텍캄몰에서 구매하신 제품과 상품은 정품으로 본사 및 전문점에서 A/S를 받을 수 있습니다.
- 무상 A/S기간에 상관없이 밴드교체 및 유리교체 등 소모품성 및 고객님의 부주의로 인한 파손은 유상 A/S(비용청구)로 처리됩니다.
- A/S 처리방법은 매장으로 방문하시거나 전화해 주시고, 우편이나 택배이용시 배송료는 본인 부담입니다.
- A/S 처리기간은 고장상태와 부품조달 관계로 1주일에서 최장 3개월까지 걸릴 수 있습니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?