Tektronix TCP202
DC Coupled Current Probe / DC 전류 프로브

TCP202는 사용자가 직접적으로 판독 할 수있는 DC 및 AC 전류 측정을 가능하게하여 정확하게 표시되고 기록 된 측정 결과를 제공합니다. TCP202는 전자 회로의 전류를 표시하고 측정하기위한 범용 프로브입니다.

• 쉬운 전류 측정
• TEKPROBE ™ BNC 인터페이스를 통해 TDS 스코프에 직접 연결되는 프로브
• 쉬운 회로 연결을위한 코어 분할 구성
• DC ~ 50MHz 대역폭
• 15 Amps DC + 피크 AC 전류
• 50 암페어 피크 펄스 전류
• 500 × 10-6 Ampere-Sec 제품
• 안전 인증

TCP202 DC Coupled Current Probe
When combined with a Tektronix TDS oscilloscope, the TCP202 enables users to make direct readout DC and AC current measurements, resulting in accurately displayed and recorded measurements.

The TCP202 is a general-purpose probe for displaying and measuring current in electronic circuits. It is ideal for power supply and motor drive design, and for device testing.

Recommended Oscilloscopes
All TDS3000C and TDS5000B Series oscilloscopes. Also operational with TDS500, TDS600, and TDS700 Series, recommended with use of calibration fixture (015-0672-50) for best accuracy.

For TCP202 operation with other TDS400, TDS500, TDS600, and TDS700 Series oscilloscopes, the scale factor will be correct but measurement will be indicated as V instead of A.

Increase the Accuracy of Your Current Measurements
The accuracy of the TCP202 AC/DC current probe is normally 3%. However, the accuracy may be improved to 1% when the probe is calibrated on certain TDS oscilloscope models using the optional Calibrator P/N 015-0672-50. This improved accuracy is available on the TDS500, TDS600, and TDS700 Series, however the optional calibrator is only functional with the TDS500, TDS600, or TDS700 Series oscilloscope calibrator pins. The calibration fixture is not required for TDS3000C and TDS5000B Series oscilloscopes.