[HIOKI IM7580 Series] IMPEDANCE ANALYZER
HIOKI IM7580 Series IMPEDANCE ANALYZER

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 1.3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM7580 offers a top measurement time of 0.5 ms over a 1 MHz to 300 MHz frequency, and both LCR and Analyzer Modes to meet applications for both high volume production inspections and research and development.

주요특징 (Features)

• 1MHz ~ 300MHz 테스트 소스 주파수
• 0.5msec의 가장 빠른 테스트 속도
• ±0.72% 판독값 기본 정확도
• 공간 절약형 테스트 헤드가 있는 컴팩트한 하프 랙 설치 공간
• 포괄적인 접촉 확인(DCR 테스트, Hi-Z 거부 또는 파형 판단을 통해)
• 분석기 모드에서 주파수 스윕, 레벨 스윕 및 시간 간격 측정 수행

▣ 모델별 사양

1. High-speed, 300 MHz high-frequency measurement
The IM7580 can perform measurement at frequencies ranging from 1 MHz to 300 MHz. Operating in LCR Mode, in which measurements are performed at a single frequency, the impedance analyzer can be used to generate PASS and FAIL results during shipping inspections. Operating in Analyzer Mode, in which the frequency is varied while performing measurement, the analyzer can be used to evaluate characteristics in product development and a variety of other applications.

2. Productivity gains from highly stable, high-speed measurement at speeds as fast as 0.5 ms
The IM7580 can perform high-speed measurement at speeds as fast as 0.5 ms (0.0005 sec.). For electronic component manufacturers that wish to test large volumes of parts more quickly, this speed advantage can yield a significantly boost to productivity.

In addition, measurement repeatability has been increased by a factor of 10 from the legacy Hioki model, enabling stable measurement, improving production yields, and boosting productivity.

3. Compact footprint for lower production costs
Electronic component manufacturers build automatic testing systems on their production lines by installing various types of devices in equipment racks. Smaller equipment means more compact testing systems, and the ability to mount multiple instruments in less space reduces testing times, lowering production costs.

Thanks to the instrument’s half-rack size (215 [W] x 200 [H] x 268 [D] mm), two IM7580 units can fit into a standard-width rack.

4. PASS/FAIL judgments based on a variety of judgment functions
LCR Mode, in which measurements are performed at a single frequency, provides comparator functionality for generating PASS/FAIL judgments for electronic components as well as bin functionality for sorting components. The comparator function allows customers to set upper and lower limits and then generates PASS/FAIL results based on those criteria. Where the comparator function generates judgments based on one set of criteria, the bin function allows users to set up to 10 sets of judgment criteria and then ranks parts accordingly.

Analyzer Mode, in which the frequency is varied while performing measurement, provides area and peak comparison functionality for generating PASS/FAIL judgments based on electronic components’ frequency characteristics. Area judgment allows users to verify that measured values fall within a previously configured judgment area, while peak judgment allows users to detect resonance points based on previously configured upper, lower, left, and right limits.

상세설명 (Description)

IMPEDANCE ANALYZER IM7580 series：LCR Measurement Using the SMD Test Fixture IM9201

The IM7580 series encompasses five models covering measurement frequencies of 1 MHz to 3 GHz.

Used in combination with the Test Fixture IM9201, which can accommodate six SMD sizes,

IM7580 series instruments allow you to measure specimens easily and reliably.

IMPEDANCE ANALYZER IM7580 series：Contact check function

The instruments’ contact check function lets you check contact between
the specimen and measurement terminals to detect faulty contact or verify good contact.

IMPEDANCE ANALYZER IM7580 series：Comparator function

A comparator function lets you check whether measured values fall within a user-defined judgment range.

This functionality is ideal for use in generating PASS/FAIL judgments for specimens.

Technical specifications

Accessary